Xiamen Ineeds Silicone Gift Co., Ltd has been deep in silicone products for nearly a decade, handling tooling, molding and quality inspection all in house. This large ice cube trays is built to last: thick rigid walls hold shape when filled, platinum-cured silicone comes out bubble-free, and the engraved edges stay sharp, logos that survive close-ups. Odor-free from -40°C to 230°C, FDA and LFGB tested, every tray fully inspected before shipping. Stable quality makes stable customization, bars and whiskey brands welcome to inquire.
A big ice cube trays carrying an embossed/debossed logo comes down to three things: material, process and structure.
1. Material: Platinum-Cured Silicone
High crosslink density, quick rebound and tear resistance, handles -40°C to 230°C both ways, food-contact certified by FDA and LFGB, odor-free.
2. Process: Vacuum Vulcanization
Compound fills the mold under vacuum, air and impurities drawn out before curing, so this silicone ice cube tray with logo reproduces every engraved detail in one shot, edges sharp, no short feed, ridges intact on ice.
3. Structure: Thick Walls, Deep Straight Cavities
Rigid body holds shape when filled to the top, large cavities let this 2 inch ice cube tray produce true 2-inch cubes that melt slow and keep drinks undiluted.
4. Release: Low Modulus, High Rebound
A light press from the base, cubes slide out whole with the embossed face untouched.
Material keeps it safe, process keeps it sharp, structure keeps it in shape. Together they back up the promise of a logo in every glass.
| Item | Spec |
| Product | 2 inch ice cube tray, large cube format,whiskey ice cube tray |
| Cavities | Six or four cavities available |
| Material | Platinum-cured food-grade silicone |
| Temp Range | -40°C to 230°C |
| Colors | Blue & black in stock, Pantone colors available |
| Logo Option | Embossed base logo, molded in one piece |
This custom logo ice cube mold comes with two options, embossed base or side printing: crisp engraved edges, firm ink bonding, logo quality as solid as the tray itself. All brand cases shown are for customization display only.
| Item | Spec |
| Inner Packing | OPP bag per set, dust-proof and scratch-proof, pearl cotton divider protects the embossed face |
| Outer Carton | Five-layer reinforced corrugated carton, stack-tested before shipment |
| Custom Packing | Color box, header card and manual customizable to your brand |
| Pallet & Loading | Palletized loading available, 20/40ft container quantity calculated per carton |
Wholesale ice cube tray orders ship in standard OPP bag plus carton, for retail-ready branding, send your artwork for color box and header card.
A: No. Embossed logos are molded in one piece, side prints bond through vulcanized silicone ink, no peeling.
A: Never. Printing sits on the outer sidewall, away from ice and drinking water, FDA and LFGB tested.
A: Yes. Deep straight walls spread cold evenly, fully set in 4-6 hours in a home freezer.
A: No. A light press from the base pops it out whole, embossed face untouched.
A: Silicone is dense and odor-resistant, one hot rinse before freezing and it’s fine.
A: Send your artwork for this custom logo ice cube mold, samples in 7-10 days after 3D drawing confirmation, embossing and printing at the same starting MOQ.
A: Yes. FDA/LFGB reports with goods, DoC available.
A: Stock 2-3 days, custom 20-25 days, sea/air/express. T/T or PayPal, 30% deposit, 70% balance.
Address
Unit B2, 1/F, NO.2, Xiangxing 3th Road, (Free Trade Zone), Xiamen Area of pilot Free Trade Zone, Fujian, China
Tel
