INEEDS handles custom silicone products, from design through production to shipment, all on one line. The Drink markers for glasses use a C-clip design that attaches directly to the glass rim without stem-hooking.
The clip flexes over the rim edge and snaps back into place, holding the marker securely through swirling and clinking. It pulls off cleanly with no adhesive or magnet involved. The silicone material is Shore A 60±5 food-grade platinum-cured, tested through 1,000+ attachment cycles without fatigue. The marker is dishwasher safe.
The flat panel provides space for Pantone-matched color and silk-screen logo printing. The marker is used in bars, weddings, wine tastings, and brand events. Stock products are available, and custom orders are accepted.
The C-clip works through mechanical grip alone. The silicone body flexes over the rim edge and uses its natural rebound force to hold the marker in place. There is no adhesive, magnet, or other bonding agent involved. When the marker is pulled off, the glass surface is left clean.
The marker is attached by aligning the clip opening with the rim and pushing sideways. The clip flexes over the edge and snaps back to its original shape. Removal is the reverse motion, pulling the clip sideways off the rim. The whole process takes a few seconds and requires one hand.
The clip opening is approximately 8 mm, accommodating rim thicknesses from 2 mm to 6 mm. This covers most wine glasses, beer glasses, cocktail glasses, and mugs. For glasses with unusual rim profiles, a sample can be sent for fit testing before bulk ordering.
The silicone has been tested through 1,000+ attachment and removal cycles. After testing, the clip shows no significant loss of grip force or permanent deformation. The Shore A 60±5 hardness provides a balance between flexibility for attachment and rigidity for a stable hold.
| Parameter | Specification |
| Product | Silicone Wine Glass Identifiers (C-Clip) |
| Material | Food-grade platinum-cured silicone; Shore A 60±5; BPA-free |
| Panel Dimensions | Diameter 25 mm; 3 mm thickness |
| Clip Opening | Approx. 8 mm; fits rim thickness of 2-6 mm |
| Temperature Range | -40°C to 230°C; dishwasher safe |
| Durability | 1,000+ attachment cycles with no significant grip loss |
| Customization | Pantone color matching; silk-screen logo on panel |
| Compliance & Documentation | LFGB, FDA food-contact; test reports available |
| MOQ | 2,000 sets for custom orders |
The 25 mm panel is the primary branding area. Silk-screen printing is used to apply logos, numbers, or text. Dark base colors with light print provide the best contrast in dim bar lighting. The wine glass identifiers are commonly used as a color-coded system where each guest or participant selects a distinct marker.
The silicone body can be formulated to match a specific brand color. High-contrast color combinations are recommended for readability at a distance. Multi-color sets with corresponding numbers or symbols can be produced within the same order.
The process follows these stages: design proof, sampling, approval, mass production, and shipping. Design work takes 5-7 days. Samples are produced in 7-10 days. Mass production runs for 20-25 days after sample approval.
The silicone drink markers are made from food-grade platinum-cured silicone, which is BPA-free and phthalate-free. The material is non-porous and does not absorb liquids or odors. It can be rinsed by hand or cleaned in the dishwasher.
Compliance documentation covers LFGB and FDA food-contact requirements. Test reports are available to qualified buyers upon request. For orders shipped to the European market, we recommend confirming the applicable standards for the intended use during the inquiry stage.
The one-piece molded construction has no seams or joints where residue could collect. The silicone surface is smooth and wipes clean with a damp cloth.
A: The C-clip uses silicone rebound force to grip the rim. The Shore A 60±5 hardness provides a balance between flexibility for attachment and a stable hold. The marker has been tested through 1,000+ attachment cycles and stays in place through swirling, clinking, and walking with the glass.
A: The clip opening is approximately 8 mm, fitting rim thicknesses from 2 mm to 6 mm. For glasses with unusual rim shapes, a sample can be sent for free fit testing before placing a bulk order.
A: Yes. The 25 mm panel can be silk-screen printed with a logo, number, or text. Pantone color matching is available for the silicone body. Dark base colors with light print provide the best contrast.
A: The markers are made from food-grade platinum-cured silicone, which is BPA-free and phthalate-free. Documentation for LFGB and FDA food-contact is available. Test reports ship with every order.
A: The silicone has been tested through 1,000+ attachment and removal cycles with no significant grip loss or permanent deformation. Platinum-cured silicone maintains its elasticity better than TPE alternatives.
A: Yes. The material is rated for temperatures from -40°C to 230°C. The marker can be placed in the dishwasher or rinsed with boiling water without fading or warping.
A: The MOQ for custom orders is 2,000 sets. Design work takes 5-7 days, sampling takes 7-10 days, and mass production takes 20-25 days. During peak season, we recommend placing orders 40 days in advance.
Address
Unit B2, 1/F, NO.2, Xiangxing 3th Road, (Free Trade Zone), Xiamen Area of pilot Free Trade Zone, Fujian, China
Tel
