INEEDS has been manufacturing silicone products for nearly a decade, with a fully integrated production line covering raw material compounding, vacuum vulcanization, and in-house mold development. The Non-slip Silicone Bottle Boot is made from food-grade platinum-cured silicone, formulated without BPA and designed for repeated daily use.
The boot provides three protective functions: impact absorption for the bottle base, scratch prevention on table surfaces, and a non-slip grip that keeps the bottle steady. Seven stock sizes cover bottle bases from 7 cm to 12 cm in diameter, corresponding to bottle capacities from 12 oz to 64 oz.
Compliance documentation for FDA food-contact, LFGB, REACH SVHC, and RoHS is available. Customization includes Pantone color matching and four logo application methods. The minimum order quantity is 500 pieces for stock colors, with samples ready in 7-10 days and bulk production in 20-25 days.
The boot is sized by the bottom diameter of the bottle. The table below provides a reference for matching common bottle capacities to stock boot sizes.
| Bottle Capacity | Boot Diameter | Notes |
| 12 / 16 / 18 / 20 / 24 oz | 7.5 cm | Best-selling size; fits most standard sports bottles |
| 32 / 40 oz | 9 cm | Large capacity sports bottles |
| 64 oz | 12 cm | Extra-large bottles and gallon-style jugs |
For bottle bases that do not match any stock size, a custom mold can be developed. Buyers can send a bottle sample or 3D drawing, and the mold will be adjusted to fit the exact bottom contour.
| Diameter | Height | Weight | Carton Size | Quantity per Carton | Gross Weight |
| 7 cm | 3.5 cm | Approx. 30 g | 50 × 40 × 40 cm | 450 pcs | 13.5 kg |
| 7.3 cm | 4.3 cm | Approx. 35 g | 50 × 40 × 40 cm | 300 pcs | 12 kg |
| 7.5 cm | 4.5 cm | Approx. 44 g | 50 × 40 × 40 cm | 270 pcs | 13.5 kg |
Additional sizes are available, including 8 cm, 8.5 cm, 9 cm, and 12 cm diameters, as well as slim and lightweight versions. Contact us for the full specification sheet.
| Parameter | Details |
| Material | Food-grade platinum-cured silicone; BPA-free, phthalate-free, odorless |
| Hardness | Elastic design for secure fit; exact Shore A available on request |
| Temperature Range | -40°C to 230°C (material performance rating) |
| Surface Finish | Matte texture; resists fingerprints and provides grip |
| Colors | Blue, red, yellow, orange, black, white, purple; Pantone custom matching available |
| Logo Customization | Screen printing, color printing, heat transfer, UV printing |
| Compliance & Documentation | FDA food-contact, LFGB, REACH SVHC, RoHS; test reports available |
| MOQ | 500 pcs per color for stock; 1,000 pcs for custom mold |
| Packaging | Individual OPP bag; combo packaging available |
The silicone layer absorbs force from everyday bumps and short falls, reducing the chance of denting or cracking the bottle base. When a bottle hits the gym floor or gets knocked against a table edge, the boot takes the first point of contact.
The boot acts as a barrier between the bottle base and the surface it sits on. This helps prevent metal bottles from scratching tabletops, and protects the bottle's own finish from wear caused by repeated placement on rough surfaces.
The matte silicone texture increases friction between the bottle and the surface. The boot helps keep the bottle from sliding on smooth desks, car cup holders, or gym benches. The elastic fit holds the boot in place around the bottle base without shifting.
For buyers with a bottle model that does not match any stock size, a custom mold can be developed. The typical workflow is:
The minimum order quantity for a custom mold is 1,000 pieces. Custom molds are exclusively for the buyer and are not shared with other clients. A Silicone Bottle Boot 18oz or any other specific bottle size can be developed through this process.
To prepare a quotation for a custom boot project, the following details are helpful:
Stock size samples are available for evaluation. Custom mold samples are produced after the mold is complete, typically taking 7-10 days after design confirmation.
The Silicone Boot is made from food-grade platinum-cured silicone. The material is BPA-free and phthalate-free, with no added plasticizers. A secondary curing step is performed to reduce volatile compounds, resulting in a low-odor product out of the box.
Compliance documentation covers FDA food-contact requirements, LFGB, REACH SVHC, and RoHS. Test reports are available to qualified buyers upon request. For orders shipped to the European market, we recommend confirming the applicable standards for the intended use during the inquiry stage.
A: The boot fits bottles with a bottom diameter between 7 cm and 12 cm, covering capacities from 12 oz to 64 oz. Seven stock sizes are available. If your bottle does not match a stock size, send us a sample or 3D drawing, and we can develop a custom tumbler boot for your specific model.
A: The boot is made from food-grade platinum-cured silicone. Documentation for FDA food-contact, LFGB, REACH SVHC, and RoHS is available. The material is BPA-free and phthalate-free, and a secondary curing step reduces residual volatiles.
A: Yes. Pantone color matching is available for brand colors. Logo application options include screen printing, color printing, heat transfer, and UV printing. Custom color MOQ is 500 pieces per color.
A: The elastic silicone stretches to slip onto the bottle base and stays in place during daily use. For cleaning, it can be pulled off without tools and rinsed in the sink or placed in the dishwasher.
A: The platinum-cured silicone is designed to maintain its shape and color through repeated use. It is rated for temperatures from -40°C to 230°C and does not harden or deform under normal use conditions. The material is flexible and returns to its original shape after bending.
A: Yes. Send your bottle sample or a 3D drawing with dimensions, and we will develop a mold for the custom Silicone Cup Bottom Protector. The process includes mold design review, CNC machining, sample molding, and client approval before mass production. Custom mold orders start at 1,000 pieces.
Address
Unit B2, 1/F, NO.2, Xiangxing 3th Road, (Free Trade Zone), Xiamen Area of pilot Free Trade Zone, Fujian, China
Tel
